|
       
Rhizopon AA Water Soluble Tablets: label
Go to Labels:
     Rhizopon® AA Water Soluble Tablets Plant Growth Regulator - Rooting Hormone Propagate New Plants by Rooting Cuttings. Improve Transplanting - Promote Root Regeneration.
Improve Plant Growth & Flower Yields. Build Root Mass
Use on house, tropical, herbaceous, perennial & foliage plants, hardy ornamental plants, trees & shrubs, evergreen and deciduous plants. Use in Greenhouses and Nurseries Only Active Ingredients:
Indole-3-butyric Acid (50 mg/tablet)....20.0%
Other Ingredients....80.0%
Total...100.0% Contents:
20 TABLETS. 250 mg each. Net wt. 5 grams
Exclusive USA Importer: HORTUS USA Corp., New York NY 10011
Made In Holland EPA REG # 63310-8 EPA EST # 63310-HL-001
Keep Out Of Reach Of Children
CAUTION See Additional Precautionary Statements on Back Panel For Technical Support visit www.rooting-hormones.com
Use Rhizopon AA to propagate new plants from cuttings. The new plants will have the same characteristics as the parent plant. Rhizopon AA treated cuttings will expect to produce uniform roots all around the basal end of the cuttings; the results are beautiful symmetric plants. PRECAUTIONARY STATEMENTS
Hazards to humans and domestic animals. CAUTION
Causes moderate eye injury. Harmful if inhaled or absorbed through the skin. Avoid contact with eyes, skin, ingestion or inhalation. Avoid breathing dust (vapor or spray mist). Wash thoroughly with soap and water after handling. Remove contaminated clothing and wash before reuse. PERSONAL PROTECTIVE EQUIPMENT
Applicators and other handlers must wear: long sleeve shirt, long pants, shoes, socks and waterproof gloves, and for exposure in enclosed areas or outdoors, dust/mist filtering respirator. (MSHA/NIOSH approval number prefix TC-21C) or a NIOSH-approved respirator with any R, P or HE filter. USER SAFETY RECOMMENDATIONS
Users should: Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing. FIRST AID Classification of Pesticide: Plant Growth Regulator | If in eyes | > Hold eyes open and rinse slowly with water for 15-20 minutes
> Remove contact lenses, if present after the first 5 minutes then continue rinsing eye
> Call a poison center or a doctor for further treatment or advise | If on skin or clothing | > Take off contaminated clothing
> Rinse skin immediately with plenty of water for 15-20 minutes
> Call a poison center or a doctor for further treatment or advise | If swallowed | > Call a poison center or a doctor for further treatment or advise
> Have person sip water if able to swallow
> Do not induce vomiting unless told to do so by the poison control center or doctor.
> Do not give anything by mouth to an unconscious person. | If inhaled | > Move person to fresh air
> If person is not breathing call 911 or an ambulance, then give artificial respiration, preferably by mouth to mouth, if possible
> Call a poison center or a doctor for further treatment or advise | NOTE TO PHYSICIAN: May cause minor eye irritation which will last a short time.
This product does NOT contain any petroleum, caustics or active solvent products | Have the product container or label with you when you call a poison control center or doctor or going for treatment. You may call 800-325-3055 or 314-770-0717. 7:30AM-5PM CST Mon-Fri or the National Pesticide Information Center (NPIC) at 1-800-858-7378 |
You may also call 800-325-3055 or 314-770-0717 for an MSDS. 7:30AM-5PM CST Mon-Fri
ENVIRONMENTAL HAZARDS
For terrestrial uses. Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. Do not contaminate water by cleaning of equipment or disposal of equipment wash waters or rinsate. DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with labeling. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation. AGRICULTURAL USE REQUIREMENTS Use this product in accordance with its labeling and with the Worker Protection Standard, 40 CFR 170. This Standard contains requirements for the protection of agricultural workers on farms, forests nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this labeling about personal protective equipment and restricted-entry intervals.
The requirements in this box only apply to the uses of this product that are covered by the Workers Protection Standard (WPS).
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. THE RESTRICTED-ENTRY INTERVAL (REI)
FOR THIS PRODUCT IS “0" HOURS. RATE DETERMINATION
A wide dosage range is indicated for most uses of this product. The ideal rate will vary according to specific plant variety and local growing conditions. To assure compatibility of this product under the specific growing conditions and to determine the dosage rate best suited for your growing conditions, it is recommended that you test a few plants at varying rates within the specified dosage range prior to large scale operations. If combined with other plant regulators, test varying rates of each product. if foliar application causes phytotoxicity, try soil applications or decreased rates. NOTES
'AI' is the Active Ingredient specified as 'ppm AI
'= parts per million AI
= milligrams (mg) AI per liter (L).
1 Liter (L)= 1000 milliliter (ml)= 33.8 fluid ounces.
For additional information on how to use 'Active Ingredient' see
‘To Make a Solution of Any Working Volume’. PROMOTE ROOTING OF PLANT CUTTINGS Use to propagate new plants from cutting- from those easy to root to the most difficult to root.
Apply to plant cuttings by convenient methods:
Total Immerse
Completely immerse several cuttings at a time for a few seconds then plant. Quick Dip
Immerse basal end of cuttings for a few seconds then plant. Spray Drip Down TM
Plant many cuttings in trays then spray cuttings until drips down. Immersion Method Immerse basal end of cuttings for a few hours then plant.
1. Take plant cuttings, usually stem cuttings.
For woody cuttings usually wound by making a 3/4" notch at basal end.
2. For Quick Dip and Immerse treat basal end of plant cuttings with solution then plant. For Total Immerse dip whole cuttings in solution then plant. For spray Drip Down plant cuttings then treat by spraying leaves and stems until drip down.
3. Take care of cuttings as appropriate for the plant variety. Control watering, temperature, humidity, light and other environmental factors. Observe and control external factors such as insects and fungus.
Mix a portion of the solution for the same day use. Dispose of un-used portion as described in the ‘storage and disposal’ statements on this label. IMMERSION METHOD Immerse Basal End Then Plant
Immerse basal end of cuttings approximately 1" in solution for 4 to12 hours. Plant immediately.
Herbaceous and Woody Cuttings, including hard to root cuttings and rootstocks: 1-3 Tablets/liter water (50-150 ppm AI) QUICK DIP METHOD Immerse Basal End Then Plant
Immerse basal end of cuttings approximately 1" in solution a few seconds. Plant immediately.
To mix more than 10 Tablets/liter see ‘To Make a Solution’.
Herbaceous Cuttings, Tropical Plants, House Plants, Roses, etc.: 3-10 Tablets/liter water (150-500 ppm AI)
Chrysanthemum: 4-10 Tablets/liter water (200-500 ppm AI)
Softwood Cuttings: 20 Tablets/liter (1000 ppm AI)
Hardwood Cuttings: 40 Tablets/liter (2000 ppm AI)
Difficult to Root Cuttings: 100-400 Tablets/liter (5000-20000 ppm AI) TOTAL IMMERSE METHOD Total Immerse Cuttings Then Plant
Immerse whole cuttings in solution a few seconds. A basket is useful. Plant immediately.
Herbaceous Cuttings, Chrysanthemum, Plumbago, Ivy, Clematis, Delphinium, Lavender, Ficus, Potted Rose Bushes, etc.:1-5 Tablets/liter water (50-250 ppm AI)
Softwood Cuttings, Buddleia (Butterfly Bush), Hydrangea, Pieris, Hedera (Ivy), etc.: 1-6 Tablets/liter water (50-300 ppm AI)
Hardwood Cuttings, Conifers,etc.: 4-10 Tablets/liter water (200-500 ppm AI) SPRAY DRIP DOWN METHOD TM Plant Cuttings Then Spray
Plant cuttings. Spray solution on leaves and stems until drip down into media.
Herbaceous Cuttings, Chrysanthemum, Begonia, Dieffenbachia, Heath, Hibiscus, etc.: 1-5 Tablets/liter water (50-250 ppm AI)
For Cuttings Which Take a Long Time to Root, or When Roots of Cuttings are Killed by Root Fungus.
Periodically spray solution on leaves and stems until drip down into media: 1-5 Tablets/liter water (50-250 ppm AI) Use solutions to promote root regeneration when transplanting.
Immersion- Absorption Method (treat bare root plants).
Soil Drench Method (treat plants in plug or ball).
Soil Drench Method (treat transplants already planted). IMMERSION-ABSORPTION METHOD TM (Bare Root Plants) Dissolve Tablets in water only. Immerse bare roots in solution. Plant immediately or use before storage.
Immerse roots in solution at 2-3 Tablets/liter water for 10 minutes, or 3-5 Tablets/liter water for 5 minutes.
After treating roots optionally spray the leaves lightly using ½ to 1 Tablet/liter water.
SPRAY OR DIP METHODS (Plants in Plug or Ball) Spray plug, ball or bare roots after taking the plants out of propagation tray, or dip whole plug or ball in solution until fully saturated.
Herbaceous Plants, House and Foliage Plants: 1-3 Tablets/ liter water.
Woody, Ornamental and Forestry Plants: 3-5 Tablets/liter water.
After treating roots optionally spray the leaves lightly using ½ to 1 Tablet/liter water. SOIL DRENCH METHOD (After Planting) After planting drench the soil.
House and Foliage Plants: 1-2 Tablets/liter water.
Herbaceous Plants: 2-4 Tablets/liter water.
Woody, Ornamental and Forestry Plants: 4-8 Tablets/liter water.
Use higher rate when soil composition draws water away from the roots. After treating roots optionally spray the leaves lightly using ½ to 1 Tablet/liter water. Use on house, tropical, herbaceous, bedding, flowering plants.
Improve growth and flowering by increasing root mass. Apply at 3-5 week intervals during the active growing season or whenever fertilizing. Apply after harvesting to improve flower regeneration. Drench the soil and or spray foliage. Use 1/10 to 1 Tablet/liter water. Hardy Ornamental Plants, Deciduous and Evergreen Shrubs and Trees.
Apply at 4-6 week intervals early in the active growing season or whenever fertilizing. Apply 1 or 2 times late in the growing season to reduce winter kill and improve following year growth. Drench the soil and or spray foliage. Use 1/4 to 2 Tablets/liter water. TO MAKE A SOLUTION OF ANY VOLUME For many applications dissolve tablets using water only.
Mix a portion of the solution for the same day use. Dispose of un-used portion as described in the ‘storage and disposal’ statements on this label. Active Ingredients entirely dissolve, in water up to 10 Tablets/liter (500 ppm AI), in water and alcohol to 400 Tablets/liter (20000 ppm AI).
A small amount of visible inert ingredients do not affect results.
Container: Use plastic not metal.
Water: Use clean water preferably distilled or deionized.
Alcohol: Use methyl or isopropyl or ethyl.
Temperature: Dissolve Tablets at 68F-85F.
'Blender' is an electric hand blender (liquefier). Stir at least 1 minute or until dissolved. When using a blender mix an adequate amount of liquid to assure adequate blender action. THREE EASY STEPS (1) Decide the concentration in Tablets/liter or ppm AI.
(2) Decide the Working Volume V.
(3) Measure and mix. 0-5 Tablets/liter (0-250 ppm AI): -Dissolve in water. Mix manually or use blender.
5-10 Tablets/liter (250-500 ppm AI): -Dissolve in water. Mix using blender
11-200 Tablets/liter (550-10000 ppm AI): -Make an initial 10000 ppm AI concentration using 50% water+50% alcohol. Dilute with water to make working concentration. Mix using blender. See STEPS TO CALCULATE below.
201-400 Tablets/liter (10050-20000 ppm AI): -Use 25% water+75% alcohol. Mix using blender. EXAMPLES TO MAKE 1 LITER (1000 ml) SOLUTION For the following mix manually or use an electric hand blender:
250 ppm AI: mix 5 Tablets in 1000 ml water.
For the following mix using an electric hand blender:
500 ppm AI: mix 10 Tablets in 1000 ml water.
1000 ppm AI: mix 20 Tablets in 50ml water + 50ml alcohol, add water to 1000 ml.
2000 ppm AI: mix 40 Tablets in 100ml water+ 100ml alcohol, add water to 1000 ml.
5000 ppm AI: mix 100 Tab. in 250ml water+ 250ml alcohol, add water to 1000 ml.
8000 ppm AI: mix 160 Tab. in 400ml water+ 400ml alcohol, add water to 1000 ml.
10000 ppm AI: mix 200 Tablets in 500 ml water + 500 ml alcohol.
20000 ppm AI: mix 400 Tablets in 250 ml water + 750 ml alcohol. TO CALCULATE THE NUMBER OF TABLETS T REQUIRED FOR A GIVEN VOLUME V Given Working Volume V and ppm AI:
V (Liters)=ml./1000
P=ppm AI /50
The Number of Tablets T= V (Liters) x P
Given Working Volume V and Tablets/liter:
V (Liters) =ml./1000
N = Tablets/liter
The Number of Tablets T =V (Liters) x N Up to 5 Tablets/liter Water (0-250 ppm AI) (1) Calculate the Number of Tablets T.
(2) Measure the Working Volume V using water only.
(3) Dissolve Tablets in water; mix manually or using hand blender. 6-10 Tablets/liter Water (300-500 ppm AI) (1) Calculate the Number of Tablets T.
(2) Measure the Working Volume V using water only.
(3) Dissolve Tablets in water; mix using hand blender. 11-200 Tablets/liter Solution (550-10000 ppm AI) (1) Calculate the Number of Tablets T.
(2) Calculate the initial mixing volume of water and alcohol (1:1) to dissolve Tablets. Water (ml.) = Number of Tablets T x 2.5 Alcohol (ml.) = Number of Tablets T x 2.5
(3) Measure water and alcohol. Dissolve Tablets in water and alcohol; mix using hand blender.
(4) Dilute with water to the Working Volume V (Liters). 200-400 Tablets/liter Solution (10000-20000 ppm AI) (1) Calculate the Number of Tablets T.
(2) Measure Working Volume V using 25% water and 75% alcohol.
(3) Dissolve Tablets in water and alcohol; mix using hand blender. STORAGE AND DISPOSAL Do not contaminate water, food, or feed by storage and disposal.
Pesticide Storage: Store in a cool dry place. Keep in original container.
Pesticide Disposal: Wastes resulting from this product m ay be disposed of on site or at an approved waste disposal facility.
Container Disposal: Triple rinse (or equivalent). Then offer for recycling, or reconditioning, or puncture and dispose of in a sanitary landfill, or incineration, or, if allowed by state and local authorities, by burning. If burned stay out of smoke. WARRANTY
It is warranted that this product conforms to the chemical description on the label thereof and is reasonably fit for purposes stated on such label only when used in accordance with the directions under normal use conditions. It is impossible to eliminate all risks inherently associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result because of such factors as weather conditions, presence of other materials, or the manner of application all of which is beyond the control of Rhizopon b.v. or Hortus USA Corp. To the extent of the law, Rhizopon or Hortus USA shall not be liable for consequential, special or indirect damages resulting from the use or handling of this product. To the extent of the law, all risks shall be assumed by the buyer. Rhizopon or Hortus USA make no warranties of merchantability or fitness for a particular purpose nor other express or implied warranty except as stated above. Hortus USA Corp.
PO Box 1956, New York, NY 10113
Master Distributor: Phytotronics
13688 Rider Trail N, Earth City MO 63045 USA.
Phone: 314-770-0717
www.rooting-hormones.com | 
